Introduction
AMPED AC1900 RANGE EXTENDER
The Amped AC1900 range extender covers more area, extending your current coverage by up to a further 7,500 square feet. It comes with the newest technology, the B1900EX pushes the signal through walls and obstacles to succeed in areas. It easily covers the entire area of your home/office. you'll easily attach to several smart devices. It has a guest network feature, parental control feature. The user can easily do setup, firmware updates in the Amped extender. you'll now manage all the attached devices with the help of the Amped ally app.
MANUALLY SETUP OF THE AMPED AC1900 RANGE EXTENDER
You can now open the pack of the Amped AC1900 range extender.
Here, unplug the modem.
Now you'll connect the antennas with the extender.
Now, you'll check the home network is working properly.
You can now attach the power supply with the extender.
Here the user can attach the power supply.
Now you'll check the power of the extender is functioning well.
If it's not working, then the user can now press the power button of the extender.
Now attach the modem, extender, and the PC with the ethernet wire.
Now you'll open the Safari browser.
After this, you'll enter www.setup.ampedwireless.com or the IP address of the extender is 192.168.1.240.
Now write the username and the password, here both are an admin.
After this, the user can enter all details of the region, time, and therefore the language in the setup wizard on the screen.
Now scan the wifi.
If it doesn't scan the wifi, then the user can enter themself.
Here the user can easily use the extender.
LOG INTO THE AMPED AC1900 RANGE EXTENDER
The user can open any browser.
Now you'll write www.setup.ampedwireless.com or the IP address is 192.168.1.240.
You can type the username and the password, here both are the admin.
The user can now access the settings easily.
SOFT RESET OF THE AMPED AC1900 RANGE EXTENDER
The user can now open the Firefox browser.
Here you'll write www.setup.ampedwireless.com.
Now the user can type the username and therefore the password, both are admins.
After this, the user goes to the advanced settings.
Here you'll tap on the factory reset.
You can now wait a couple of seconds.
Now your extender in the default settings.
HARD RESET OF THE AMPED AC1900 RANGE EXTENDER
You can now locate the reset button.
Now you'll press it with the paper pin.
Wait for a couple of seconds.
Here the lights start flashing.
The user can now see the lights come stable.
You can get the extender in the default settings.
After this, the user can again set up the extender.
The Amped AC1900 range extender covers more area, extending your current coverage by up to a further 7,500 square feet. It comes with the newest technology, the B1900EX pushes the signal through walls and obstacles to succeed in areas. It easily covers the entire area of your home/office. you'll easily attach to several smart devices. It has a guest network feature, parental control feature. The user can easily do setup, firmware updates in the Amped extender. you'll now manage all the attached devices with the help of the Amped ally app.
MANUALLY SETUP OF THE AMPED AC1900 RANGE EXTENDER
You can now open the pack of the Amped AC1900 range extender.
Here, unplug the modem.
Now you'll connect the antennas with the extender.
Now, you'll check the home network is working properly.
You can now attach the power supply with the extender.
Here the user can attach the power supply.
Now you'll check the power of the extender is functioning well.
If it's not working, then the user can now press the power button of the extender.
Now attach the modem, extender, and the PC with the ethernet wire.
Now you'll open the Safari browser.
After this, you'll enter www.setup.ampedwireless.com or the IP address of the extender is 192.168.1.240.
Now write the username and the password, here both are an admin.
After this, the user can enter all details of the region, time, and therefore the language in the setup wizard on the screen.
Now scan the wifi.
If it doesn't scan the wifi, then the user can enter themself.
Here the user can easily use the extender.
LOG INTO THE AMPED AC1900 RANGE EXTENDER
The user can open any browser.
Now you'll write www.setup.ampedwireless.com or the IP address is 192.168.1.240.
You can type the username and the password, here both are the admin.
The user can now access the settings easily.
SOFT RESET OF THE AMPED AC1900 RANGE EXTENDER
The user can now open the Firefox browser.
Here you'll write www.setup.ampedwireless.com.
Now the user can type the username and therefore the password, both are admins.
After this, the user goes to the advanced settings.
Here you'll tap on the factory reset.
You can now wait a couple of seconds.
Now your extender in the default settings.
HARD RESET OF THE AMPED AC1900 RANGE EXTENDER
You can now locate the reset button.
Now you'll press it with the paper pin.
Wait for a couple of seconds.
Here the lights start flashing.
The user can now see the lights come stable.
You can get the extender in the default settings.
After this, the user can again set up the extender.
Contact Info
Address:
165 Dogwood ct.
165 Dogwood ct.
165 Dogwood ct. 94544
United States
165 Dogwood ct.
165 Dogwood ct. 94544
United States
Tel:
18448545690
Website:
https://ampedwirelessextendersetup.com/
Hours of operation
| From | To | From | To | From | To | ||
|---|---|---|---|---|---|---|---|
| Monday | Open | ||||||
| Tuesday | Open | ||||||
| Wednesday | Open | ||||||
| Thursday | Open | ||||||
| Friday | Open | ||||||
| Saturday | Open | ||||||
| Sunday | Open | ||||||
