Gecko Fall Protection (Pty) Ltd

Honeywell-Miller SafEscape ELITE

During the rescue or evacuation operation of a high access worker, safety is of paramount importance and that is why we have developed the next generation rescue solution.

The unit has been engineered to comply with the most rigorous testing methods, set out by the SANS / EN 341/2008 standard. This will ensure the Safety of the people working at height.


Enhanced safety
In a rescue or evacuation procedure time and environ- mental conditions are often against you and you need to be able to rely on your safety solution. You can trust our Honeywell-Miller SafEscape ELITE to take you to safety even under the harshest conditions:

Compliance
Honeywell-Miller SafEscape ELITE complies with the SANS / EN 341/2008 standard, which sets out the most thorough tests for rescue devices including:

· 8000 m descent for 100 kg (16 x 500 m)

· Maximum descent height of 500 m

· Use in an emergency by 2 people weighing up to 250 kg

· Has been tested to withstand the rigors of bad weather: in accordance to EN 341/2008 in wet conditions
Thanks to its durable high-quality anodized aluminium housing, our unit remains in optimum condition of use, even in the toughest environments.

Greater cost-savings
Recertification by factory or Honeywell-Miller Service Point is required only after seven years, thanks to its robust and highly resistant components. This reduces down time and lowers the cost of ownership

Increased ease-of-use
The position and design of the hand wheel reduces swaying during lifting, facilitating evacuation procedures.

Descent is quick (1m/s) and smooth, thanks to a centrifugal brake, which controls the descent and reduces vibration.

Global solution
The Honeywell-Miller SafEscape ELITE is CE certified and meets SANS, ANSI and OSHA requirements, making it the perfect unit when a global solution is required.

Ideal for high rescue situations from:

· Wind turbines

· Antennae masts

· High voltages pylons

· Silos

· Towers

· Buildings

· Chimneys

· Cranes

· Gantries

· And any areas normally inaccessible by conventional means.

Specifications:

· Descend loads possible from 30 kg -- 250 kg (2 people)

· 75 kg / max. 20 x 500 m (10.000 m)

· 100 kg / max. 16 x 500 m (8.000 m)

· 150 kg / max. 4 x 250 m

· 250 kg / max. 2 x 200 m

· Also approved for weights up to 250 kg,

· Maximum descend height: 500 m

· Controlled descend speed: 1 m / second

· Weight (without rope): 2.2 kg



Standard - complies with:

· SANS / EN 341 : 2008

· SANS / EN 1496

· ISO 22159

· ANSI Z359.4-2007