Iron-Chromium-Aluminum Alloy Wire

Iron Chromium Aluminum alloy wires have high resistance, low temperature coefficient of electric resistance, high operating temperature, and good corrosion resistance under high temperature, especially under the atmosphere containing sulfides. Iron Chromium Aluminum alloy wire possesses good oxidation and heat resistance.

Iron Chromium Aluminum alloy wires are creep-resistant over a wide range of temperature, which is another of their important qualities. Iron Chromium Aluminum alloys wires have several potential advantages, such as lower raw-material cost, superior oxidation resistance, lower density, and lower thermal expansion coefficient than the Ni-base super-alloys. However, Iron Chromium Aluminum Alloy wire has less hot strength than nickel alloys but much higher melting point and lower price. After being heated the alloy's plasticity becomes bad, easy brittleness, not to be easy to weld. However, If can be reasonably used, also be a kind of ideal electric heating material.

Available Specifications:
Wire Diameter: 0.05mm-10.0mm, 0.002 Inch to 0.3937 Inch

Constituents:
Iron Chromium Aluminum alloy wires are made of iron chromium aluminum base alloys containing small amounts of reactive elements such as yttrium and zirconium. The high aluminum content, in combination with the high chromium content causes the scaling temperature to increase up to 1425ºC (2600ºF ); Iron Chromium Aluminum alloys also have excellent oxidation properties at 800-1300ºC because of the formation of a highly protective Al2O3 scale.

FeCrAl alloy is a ferritic iron-chromium-aluminum alloy with high resistivity and has superior oxidation resistance for use at temperatures up to 1450 centigrade degree., as compared to other commercial Fe and Ni base alloy. Iron-Chromium-Aluminum FeCrAl alloys resisting heating wire are available as wire, strip, welded and seamless tubes.

Iron Chromium Aluminum alloy wire Applications:
Iron Chromium Aluminum alloy wires intended for prolonged operation at high temperature. Iron Chromium Aluminum alloy wires are used chiefly for heating elements in the electrical industry and wide range of high-temperature oxidation environments, such as industrial electric furnace, heating furnace, nuclear reactor, petroleum refinery and automotive exhaust system, household electrical appliance, electrical oven, electrical heater, infrared settings and far infrared ray device.

Iron Chromium Aluminum alloy wire has the ability to withstand oxidation. The wires can be employed under high-temperature conditions, while their good ductility enables them to be processed into wire and strip by hot and cold working.

Product Description: The product produced by us is of good quality and is priced reasonably.
Competitive price: The labour cost and cost on procuring the raw materials is low and hence the manufacturing cost is reasonable. We provide high facility in short producing cycle and have strong adaptive capacity in producing variation of products.
High quality assured: The work done by us has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products. The chemical analysis department, the physical testing department and the quality control department all operate an all-round monitoring of our products from raw materials to final products.