-
F&R PRODUCTS LTD13 Jul 2022Sigma 13-S punch press spec
We would like to introduce the Sigma 13-S water chiller which is specifically designed to replace Amada specification VP12 chillers for the cooling of punch press machines.
If you are budgeting to replace the VP12 due to reduced cooling capacity, reoccurring repair costs etc., please consider the Sigma 13-S as a direct replacement that is readily available from F & R Products Limited’s stock chillers.
In addition, as well as being Hyfra’s UK agents, F & R Products Limited are both F Gas registered and REFCOM approved, and are able to offer quick site attendance, authentic spares, plus annual/biannual service contracts for all water cooling equipment through our network of refrigeration engineers based throughout the UK and Ireland.
If this is of interest to you, or indeed, have any need of our services or require additional information, please do not hesitate to contact us.
For further information contact F&R Products Ltd on 01823 663281 or [email protected].Comment · -
F&R PRODUCTS LTD08 Nov 2019RCU Water Chillers for Food Industry
F&R Products’ RCU range of water chillers are unique in their design in that they are able to chill tap water to 1°C without the addition of glycol, this being especially useful for cooling potable water for food applications.
The unique system of copper coils, immersed in an insulated tank, is able to support high or low volume water flows without the problems associated with other conventional evaporators such as plate, coaxial or tube in tube designs.
The standard evaporator material for the range is copper tube immersed into a GRP tank but other materials are available such as various grades of stainless steel suitable for food applications.
The design also offers a far greater degree of temperature stability than conventional chillers due to the large water volume acting as a thermal flywheel.
Other variants include the facility of a special coil size to fit within a customer’s existing tank.
Typical applications would be to cool the water prior to being mixed with flour in the manufacture of bread or pastries.
Contact us on 01823 663281 or [email protected] for more information.Comment · -
F&R PRODUCTS LTD15 Jan 2019F&R Products Ltd’s Website
www.fandrproducts.co.uk
Some of you who follow our website will have noticed our website went missing for a few weeks! This was due to an attack from outside forces who believe it is fun to mess around with other peoples’ property.
We are now pleased to announce that due to the hard work and endeavours of our web host, Marmalade Designs, we are back on line.
Our website gives help and assistance to those who are unsure as to what form of equipment they require and how to calculate the size of equipment that is required.
If all else fails you can always call us on 01823 663281 and we will do our very best to help with your selection of the most suitable solution.Comment · -
F&R PRODUCTS LTD03 May 2018Want a packaged DRY AIR COOLER with a small footprint?
Contact F&R Products Ltd who offer a range from 3kW up to 200kW that can be designed for any application.
F&R specialise in tailor-made bespoke equipment. We also have a standard range ready for on-site installation with the minimum of pipework or electrical wiring.
F&R Products Ltd’s range of packaged dry air coolers (otherwise known as air blast coolers) are supplied complete with integral pumps and tanks with duties ranging from 3kW to 200kW, ready for immediate connection to on-site pipework and electrical supply.
The standard range can be modified to suit customers’ requirements with a wide range of options being available or other specific criteria required by the customer. F&R Products also supply a range of flat bed or ‘V’ block dry air cooler models as a free-standing entity or as a purpose made assembly, designed to suit specific sites complete with bulk holding tanks and pump sets.
For further information contact F&R Products Ltd on 01823 663281 or [email protected].
Comment · -
F&R PRODUCTS LTD26 Jul 2017Hyfra Pedia eCHILLY Compact Water Chillers
F&R Products Ltd offer off the shelf delivery of the Hyfra Pedia eCHILLY range of compact water chillers.
The range provides for cooling duties ranging from 0.5kW up to 7kW within six specific duties, each fully packaged complete with pump, tank and all necessary controls.
On delivery all that is necessary is to connect equipment to the chiller, fill with water, plug in the electrical supply and you are ready to run.
Physical sizes range from 560 x 475 x 355mm high to 760 x 635 x 500mm high, ideal for under bench or on bench siting.
Should you require to customise the unit for your specific application a wide variety of options are available.
For further information contact F&R Products Ltd on 01823 663281 or [email protected].
Comment · -
F&R PRODUCTS LTD25 Nov 2016Winter is coming – check your water cooling systems!
As the first signs of winter shows itself with the days getting shorter and the mornings colder, it is time to check glycol levels in your water cooling systems.
To prevent that expensive repair or replacement invoice check NOW the glycol levels in your cooler to prevent frost damage.
There are two main types of glycol; Ethylene and Propylene. Ethylene for systems not associated with food industry and Propylene for systems that may be ingested.
Ideal concentration would be 25% to 30% thus preventing system from freezing in ambients down to minus 10°C to minus 16°C. Too much glycol will result in reduced cooling duty.
For further information contact F&R Products Ltd on 01823 663281 or [email protected].Comment · -
F&R PRODUCTS LTD18 Dec 2015Reconditioned Water Chillers for Hire
F&R Products Ltd are able to offer reconditioned water chillers for hire, short or long term at reasonable rates. Sizes range from 1kW cooling duty upwards.
Part exchange is also available should you wish to increase your capacity or downsize to reduce energy consumption.
Redundant water chillers bought for cash following inspection.
For further information contact F&R Products Ltd.Comment · -
F&R PRODUCTS LTD23 Sep 2015EXTRUSION BATH COOLING
The ALPHA series of refrigerated water chillers are ideal for extrusion bath cooling.
• The footprint is small so can be installed at end of extrusion line minimising pipework
• System can utilise existing water circulating system
or
• Unit can be supplied with integral pump
• Duties range from 3kW to 160kW
• Incorporates latest design technologies
• Minimum refrigerant content.
• Can be customised to suit your needs.
For further information contact F&R Products Ltd.Comment · -
F&R PRODUCTS LTD23 Apr 2015SPINDLE COOLING
F&R Products Hyfra Pedia range of small compact packaged water chillers have proven very popular with machine shops, managers and suppliers alike who require suds oil cooling for their machinery spindles.
The eCHILLY range being particularly versatile in the range of cooling temperatures they can achieve, provides a unique opportunity for a single chiller to satisfy many applications whilst being small in size.
As standard they claim a temperature stability of plus/minus 1°C whilst, if required as an option, stabilities of plus/minus 0.1°C are achievable.
Contact F&R Products Ltd for more information.Comment · -
F&R PRODUCTS LTD01 Oct 2014Hyfra Pedia eCHILLY range
Hyfra Pedia “eCHILLY” range of smaller packaged water chillers have been redesigned to incorporate the new generation of micro-channel aluminium condensers, enabling the design to be more compact whilst using 60% less refrigerant than its predecessors.
The range as standard now incorporates copper evaporator, volt free alarm signal, low water level switch to stop pump, metal mesh air filter and stainless steel enclosure on painted metal base plus all other features incorporated in the original “CHILLY” range . . . . . and they are less expensive!
Contact F&R Products Ltd for more information.Comment ·
Email F&R PRODUCTS LTD
Do not send job enquiries or promotional messages via this form.
Non-genuine enquiries can result in you being blocked from the site.